X4

Stereo3D 173
http://pro.magix.com
Side-by-side: Create 3D movies for a 3D-capable playback device without
having to compromise the quality. It doesn't matter initially whether your video
is viewed in "Shutter" mode or via "Polarized filter".
 Depending on the playback device, you should set double the resolution in
order to get an image in full resolution for the left and right partial image.
 Not all playback devices are capable of double resolution. If this is the case for
your device, 50 % pinched images will be displayed. The quality is
nevertheless higher than output via the anaglyph technique.
Note: When exporting into Side-by-Side- formats, make sure that the
horizontal resolution equals the sum of both images, while the aspect ratio
(such as 16:9) relates to one test image!
Only left/right side: With these settings, you won't export in 3D, but just one
side of your 3D -video.
Flicker image: This way you can view 3D material without 3D glasses. The
material will be shown in an alternating order, creating an impression of
flickering images.
On top of each other: This export option is similar to the "Side-by-Side"
option. The images will be exported not next to each other, but one over the
other.
 Depending on the playback device, you should set double resolution to get an
image in full resolution for the top and bottom partial image.
 Not all playback devices are capable of double resolution. If this is the case for
your device, 50 % pinched images will be displayed. The quality is
nevertheless higher than output via the anaglyph technique.
Note: When exporting into the one-over-the-other-formats, make sure that the
vertical resolution is the sum of both images, but that the aspect ration (e. g.
16:9) relates to the partial image!
Export files/upload movies to the Internet
All file exports can be found via "File > Export movie" or "File > Online".
Depending on the export format and destination, the export dialog also allows
the 3D technique to be used to be selected.