X4

172 Stereo3D
http://pro.magix.com
Turn camera movements into 3D videos
Camera movements may be transformed into 3D videos by being duplicated
and converted via time displacement. To do so, you can simply record on the
right or the left side while, for example, driving along a street.
The speed should be set between 6-15 km/h (approx. 4-10 mph) and depends
on the frame rate, the focal point, and the distance of the objects being filmed
(among other things). At increased speeds, it may occur that the spatial
impression is too strong and the filmed material seems unnatural and
unpleasant.
 If the video is in the arrangement, the stereo depth for the 2D object may be
set in the Media Pool via "Effects -> Stereo 3D --> Properties".
 Depending on the direction of the recordings, you will have to move the
control either to the right or the left.
 Check the results in the anaglyph display with red/cyan glasses
 Correct any unrealistic effects by adjusting the controller in the opposite
direction.
 If the spatial depth is exaggerated, reduce the changed parameters.
Note: Not only camera movements, but also other 2D materials may be
arranged spatially.
3D material may be edited with the same functions as 2D material.
Create titles for 3D videos
Xara3D title objects automatically have "real" 3D properties and for this reason
may be used in the arrangement without any problems.
Export and burn 3D videos
There are no special requirements for export and burning. Only the desired 3D
technique is specified.
Anaglyph: This technique is recommended for uncomplicated playback of
finished videos or playback via conventional TV sets or projectors. Viewers
must simply put on a pair of red/cyan glasses to be able to enjoy a 3D film.