X4

Stereo3D 171
For this
task, go to "Media Pool -> Effects -> Stereo 3D" and access the entry
"Aligning".
Move both images one over the other, so that the minimum point of both sides
is at the same location on the screen.
You should first see whether automations for spatial adjustment and
synchronization deliver desired results. Click on the button "Automatic".
If the result isn't what you're looking for, proceed as follows:
 Find the minimum point in the image.
http://pro.magix.com
 If th
e images are offset vertically, then these need to be balanced via the lower
of the two slide controllers under "Spatial alignment".
 If the images have rotational differences, you have to adjust these with the
knob.
 Try to position the minimum points of both sides precisely one above the other
using the upper slider.
 To test the results, put on the cyan/red glasses. In case the image has an
exaggerated spatial depth, try to position the left and right sides closer to each
other using the controls under "Spatial alignment".