X4

Stereo3D 169
In m
ultiple files
Some 3D cameras create a file for each the left and the right side. This working
technique works also if you simply take 2 pictures with a regular photo camera.
 In the Media Pool, open the folder in which the desired file can be found.
 Sort the files in increasing order according to the date. This way, all files will lie
in pairs one below the other.
 Now, select the files and drag them from the Media Pool directly into your
arrangement.
 In the Media Pool select "Side-by-side (left image right/left) under "Effects >
Stereo 3D > Properties > Create stereo" for material with halved width.
Note: If you have created side-by-side material yourself (e.g. placed two
photos next to each other in an image file), proceed as described, but at the
end select the "side-by-side (left image left/right)" for material with full width.
Set playback mode for 3D
There are various techniques available for playback of 3D videos on the
computer. Depending on the technology used, the corresponding playback
mode may be activated in MAGIX Video Pro X4.
Select the 3D mode you want to work with in the upper left
corner of the video monitor.
http://pro.magix.com
Here is a
list of available techniques and the corresponding requirements:
3D mode Equipment Requirements
View partially interlaced
Polarizing filter
 Polarizing filter glasses
 Special monitor, typically
referred to as a 3D monitor or
similar
Note: You can choose between right or left image first, depending on which
type of display produces better results on your monitor.
Shutter export
Shutter mode
 nVidia 3D Vision Kit
 120 Hz monitor/projector