X4

162 Effects
Appl
ication
First you have to check the movie material for shaky scenes. To do this click
on the "Stabilize" button. Based on the preset parameters, a relative shift
between the pictures is calculated. After concluding the analysis, take a look at
the suggested correction, then use the slider for further adjustments. Once you
are happy with the final correction click OK. If the first scan did not provide a
satisfactory result, try changing the parameters below and repeat the process.
Image stabilization dialog
Stabilization radius for analysis: To prevent the image stabilizer from
recognizing every camera movement as unwanted shakiness, you can
determine the radius within which movement is accepted; the larger the
stabilization radius, the more shakiness is corrected. Changing this parameter
will require re-analysis of the source footage.
Sectio
n of analysis: This area determines the area of the footage that should
be analyzed. The center of the image is preset. If shaking occurs in one area
more than in another, then you can move the analysis area (e.g. a foreground
element at the edge is especially shaky). To do this, use the mouse to
“capture” the shaky area. The smaller the area, the quicker the analysis will be
calculated. Generally, changing this parameter will require re-analysis of the
source footage.
Maximum displacement: Correction moves the image accordingly to the
shaking movements. This means that the edge of the image will be removed.
This value determines how large the edge area is which may be cut away by
http://pro.magix.com