X4

Markers 111
Project markers
The "Edit" menu or the keyboard shortcut "Shift + numerical keys 1-0 (0 for the
tenth marker) allow you to set a project marker (view page 313) at the current
position
of the playback marker. They function as a mental marker or indicate
certain positions or events within the project.
After selecting the menu item, a dialog appears to input a name for the marker
to be created. The first ten project markers may be accessed via Ctrl + number
keys 1-0. This allows you to jump to a particular position of a longer video
immediately, without scrolling and searching.
Project markers may be deleted or renamed via the context menu at any time.
This does not provide direct influence on the result, but they do make the
workflow much easier.
Ranges (in and out points)
Range markers are the "in points" (range start) and "out points" (range end).
They mark a certain range for playback that can be viewed by pressing the
"Range Playback" button at the bottom of the corresponding monitor.
http://pro.magix.com
To the left,
you can see an in point (range start), and an out point is visible
(range end) to the right
Hint: The value between both markers shows the length of the selected area
according to the pattern Hours:Minutes:Seconds:Frames.
There are various options for changing the playback range, and with it the
project start and end markers.
 Set the playback marker at the desired position and press "Set start of range
(in-point)" or "Set end of range (out-point)" underneath the monitor to set the
in and out points of the range.
 Click on one of the markers below the preview monitor and move it with the
held-down mouse key to the desired position.
 Click one of the markers in the upper-most bar in the arranger and drag it.