X4

Objects 105
 Click in the program monitor on
the button in the transport control
for the start of the section (in
point).
 Double click the desired file in the Media Pool to load it into the source
monitor.
 Find the position in the source monitor where the material should be inserted.
 Click the button in the source's
monitor's transport control for the
start of the section (in point).
Note: To insert the complete material, an in point doesn't need to be inserted
into the source monitor. Source in will now be the start of the source material.
 Select the insert mode "Overview (view page 44)" to overwrite the
ma
terial in the arranger behind the in point.
 Or use one of the two ripple modes (single-track ripple or multi-
track ripple (view page 43)) in order to cut the material at the
p
osition of the in point and move it to back.
"Overwrite" mode does not change the total length of the project. The new
material is only inserted at the position of the in point:
http://pro.magix.com