X3

Workspaces
53
Transport control
Both transport controls enable the video material to be played back.
Range: Change the range between the in and out
points by clicking above the playback functions.
www.magix.com
Playback marker: This marker indicates the location of the image
currently displayed on-screen.
Set in/out points: Defines the start and end of the playback range.
To the start: This button sets the playback marker to the start of the
current area.
Playback by a frame: This button sets the playback marker just
behind the current frame and plays it back.
Play/stop (pause): The playback button in the middle starts
playback. A second click ends playback.
Tip: In the menu "File -> Settings -> Program -> Playback", you can set
whether the playback marker will go back to the start position (stop) after the
second click or following the appropriate shortcut (space bar), or if it should
stay at the current position (pause function).
Range playback: This button plays back the current range.
To the end: This button sets the playback marker to the end of the
current range.
Jog wheel: Using this wheel, you can move by
single frames within the video and position the
playback marker exactly at high zoom levels.
Shuttle control: The further the slider control is
moved to the side, the quicker the arrangement is
played in the corresponding direction. This way a
certain position can be reached quickly.