X3

Stereo3D (deluxe version)
157
For th
is task, go to "Media Pool -> Effects -> Stereo 3D" and access the
entry "Aligning".
Juxtapose both images one over the other, so that the minimum point of
both is at the same location.
You should first see whether automations for spatial adjustment and
synchronization deliver desired results. Click on the button "Automatic".
www.magix.com
If
this does not produce the desired effect, proceed as follows:
 Find the minimum point in the image.
 If the images are offset vertically, then these need to be balanced via the
slide controllers under "Spatially align".
 If the images have rotational differences, you have to adjust these with the
rotation controller.
 Try to juxtapose the closest points of both sides precisely using the upper
slider.
 To test the results, put on the cyan/red glasses. In case the image has an
exaggerated spatial depth, try to position the left and right sides closer to
each other using the controls.