X3

156 Stereo3D (deluxe version)
Set playback mode for 3D
There are various techniques available for playback of 3D videos on the
computer. Depending on the technology used, the corresponding playback
mode may be activated in MAGIX Video Pro X3.
Select the 3D mode you want to work with in the upper left
corner of the video monitor.
Here is a list of available techniques and the corresponding requirements:
3D mode Technology Requirements
Display occurs in rows Polarizing filter
 Polarizing filter glasses
 Special monitor, typically
referred to as a 3D monitor or
similar
Side-by-side display Shutter mode
 nVidia 3D Vision Kit
 120 Hz monitor/projector
Note: Both of these modes should only be set in case the preview image is
output on a separate monitor. Shutter mode also requires a 3D-capable
graphics card.
Anaglyph display Color
anaglyphs
 Red/cyan glasses
Align videos and pictures for 3D
Anaglyph display is recommended for this, which may be set via the video
monitor (view page 156). Only in this mode is precise geometric alignment
of images
possible.
Note: In case you wish to edit 3D-video material, it is recommended to
conduct scene recognition and split the video into individual scenes. This is
necessary because the left and right side of each scene must be arranged
individually.
The so-called minimum point is the point in the picture that the camera is
closest too. This forms the "center" of the 3D image and must be defined as
such in MAGIX Video Pro X3.
www.magix.com