X2

86 Insert object into the project
1. First, select "Start" from the "Search scene change" box. The search for possible
scene transitions will begins. If you have a large amount of material, then this may
take a while, but the image analysis has to be done just once for each
recording. The
results are saved together with the video file.
e
re still not happy with the
resulting scene partitioning simply repeat and correct where necessary.
s
If the scene recognition is performed again with the same source material, then th
scene transitions found are immediately displayed. If you a
2. All found scene transitions in the list can be checked in the dialog. Every scene
marker can be selected or deleted. Select a scene transition from the list of found
scene transitions and use the preview images to check whether the found transition i
really a scene change or not.
Tip: This option is helpful, for example, if a camera flash was captured in the source
footage. The flash from the camera would cause a sudden brightness modification even
though there was no actual scene change.
The preview always displays the end of the previous scene and the beginning of the new
ttons you can enlarge the part of the arranger where the selected
revious scene ended.
scene. If the images do not differ except for the brightness, then the scene may have been
falsely recognized. In this case select
"Delete scene marker".
Via the zoom +/- bu
scene begins or p
You can use the
"Sensitivity" controller to change the sensitivity of the scene recognition
to detect different scene changes, depending on the settings.
"Action on OK" lets you specify whether the movie should be cut at the selected scene
transition or at all scene transitions and whether the found scenes should be saved as
takes.