X2

60 Create new video project
• For example, if you use "MIDI Yoke NT1" under "Output synchronization", then the
synchronized.
MAGIX Video Pro X2 as slave
MAGIX Video Pro X2 set as the slave causes the program to follow an external source or
another program during playback.
• Open the
Synchronization dialog (view page 58).
• Under "Input synchronization", set the MIDI device that is connected to the device that
MAGIX Video Pro X2 is supposed to sync with.
• In case you want to synchronize another program (e.g. Samplitude/Sequoia) via a virtual
MIDI cable with MAGIX Video Pro X2, please mak ing MIDI
device is set in both programs. The program that ization source
must support MTC and be configured as the "master".
• For example, if you use "MIDI Yoke NT1" under "Input synchronization", then the device
"MIDI Yoke NT 1" must also be set in the MTC output in the master.
ize MAGIX Video Pro X2 with Samplitude/Sequoia for
Surround productions.
deo Pro X2
is he m o Pro X2
but sen ethod
allows p
rround project to MAGIX Video Pro X2 (view page 173)"
ound projects are transferred from Samplitude/Sequoia to
they are processed.
Re u
Since be
install e" or "Hubi's MIDI Loopback Device". Configure the driver
as required so that at least two virtual MIDI devices are available.
If a Surround project is to be created, then you require a Surround-capable sound card
Setting up MAGIX Video Pro X2
nization ialog
• Activate the box "Input synchronization active".
Under "Device", set the first free virtual MIDI device (e.g. "MIDI Yoke NT 1").
Now set the transport controls via MMC (MIDI machine control):
• Click the "MMC button" to open the "MIDI machine control".
• Activate the box "Receive MMC commands (slave)".
• Under "Device", set the second free virtual MIDI device (e.g. "MIDI Yoke NT 2").
• Close both dialogs by pressing the "OK" button.
device "MIDI Yoke NT 1" must also be set in the MTC input of the program to be
e sure that the correspond
is set to be the synchron
Synchronizing Samplitude/Sequoia with MAGIX Video Pro X2
This section should help you synchron
T e introh
t
duction featured here provides a single example. In this case, MAGIX Vi
aster: Samplitude/Sequoia follows the time information from MAGIX Vide
ds information from the transport control to MAGIX Video Pro X2. This m
layback from both programs to be started while they run synchronously.
The chapter "
Transferring a Su
explains how completed Surr
MAGIX Video Pro X2 and how
q irements
synchronization occurs via MTC (MIDI time code), a virtual MIDI driver must
ed. Examples are "MIDI Yok
with at least 6 channels.
• Open the synchro d
•