X2

52 Workspaces
Transport control
Transport controls on the preview monitor enable you to play back video and image
material in the Arranger or as a preview in the Media Pool.
Transport control buttons
Range: Above the playback functions, the range between
the in and out points can be changed by clicking it.
Playback marker: This marker indicates the location of the image currently
displayed on-screen.
Set in/out points: Defines the start and end of the playback range.
To the start: This button sets the playback marker to the start of the current
area.
Playback by a frame: This button sets the playback marker just beh d the
current frame and plays it back.
in
Play/Stop (pause): The playback button in the middle starts playback
click ends playback.
. A second
Tip: I er the n the menu "File -> Settings -> Program -> Playback", you can set wheth
playb r following ack marker will go back to the start position (stop) after the second click o
the appropriate shortcut (space bar), or if it should stay at the current position (pause
function).
Area playback: This button plays back the current range.
range.
To the end: This button sets the playback marker to the end of the current
Jog wheel: Using this wheel, you can move
frames within the vide
by single
o and position the playback marker
exactly at high magnifications.
Shuttle control: The further the slider control is moved to
the side, the quicker the arrangement is played in the
tain position can be corresponding direction. This way a cer
reached quickly.