X2

Burn discs 209
Burn dialog for DVD player
our burner, the type of disc, the encoder settings, etc. For video CDs this is MPEG-Select y
1; for Mini DVDs, Super Video CDs and DVD, use MPEG-2. Blu-ray Disc uses MPEG-2,
and higher bit rates are applied in order to reach the higher HD resolutions.
Steps
1. S have multiple burners installed, you can select
which device you wish to use in this menu.
gs: Use the “Encoder” button to access the selection dialog where
the properties of the MPEG encoder (memory requirements, quality
n of the MPEG conversion).
ced" button opens the "Advanced settings" dialog. Here you can adjust all
the fine settings of the MPEG encoder.
Burning disc/starting video encoding: "Burn disc": This starts the disc burning process.
and ev simulation is carried out, the disc project is encoded
(for VCDs with MPEG-1, with SVCD, DVD and mini-DVD with
MPEG-2 (See "MPEG
ave the option of choosing a storage location for the MPEG file on
the hard disk. e
burn p ning
may ta
e
The simplest way to create an ISO image is to select "Image recorder" under "Burner".
"Burning process", you have to specify a name for the image file you
for burning DVDs, etc.
et up burner and burn speed: If you
2. Encoder settin
you can specify
and duratio
The "Advan
Every time you burn ery time a
Compression
")). You h
Please note that the MPEG file is not deleted from the hard disk after th
rocess has finished. Depending on the length of the project, encoding and bur
ke some time. The time required can be seen in the dialog.
Creating an ISO imag
When starting the
wish to create.