X2

Titles and effects 145
MultiMax
MultiMax is a compressor with three independent frequency bands. The dynamics are
The benefit of a multi-band compressor in comparison to a "normal" compressor is that the
cts are dramatically reduced when
editing the dynamics. For instance, it can prevent a bass top peak from "reducing" the
ndividual frequency ranges.
are
changed in the same ratio. The type of dynamic editing is not influenced.
High quality: When the "high quality" setting is activated, an even more precise algorithm is
more processing power. We recommend that you switch on this
Setting the frequency band: The settings of the frequency bands are changed directly in
knobs control the level of compression for each frequency band.
In MultiMax you can use the presets to open further special functions.
Dynamic expander: Compression that is too high will result in audible noise (usually
rt). The expander enhances the
dynamics of the recording.
Cassette NR-B decoder: MAGIX Video Pro X2 simulates decoding of Dolby B + C noise
le. Cassettes recorded with Dolby B or C sound
Noise gate: This cleaning function suppresses noise entirely below a certain noise level.
is no longer required. You can use this function to equalize greater
volume differences within a song. To equalize volume variations between different songs
"Effects" menu.
edited separately for each band.
"pumping" tendency and other disturbing side effe
entire signal.
Multi-band technology also lets you specifically edit i
Link bands: When this function is activated and one fader is adjusted, all faders
used, but this requires
setting before you export the project.
the graphic. Simply click on the separator lines and move them.
Bass/Mid/High: These
Presets
defined as a pumping sound). Particularly radio recordings are recorded with very high
compression rates to increase the perceived volume. Unfortunately compression reduces
the dynamics (interval between the quietest and loudest pa
suppression if no Dolby player is availab
more muffled and slurry if played back without corresponding Dolby.
This lets you create, for example, song transitions that are entirely noise-free.
Leveler: This setting automatically sets the entire material to an identical volume level. The
volume control knob
you can also use the function "Normalize loudness" from the