4.0

16
www.magix.com
Recordings from MiniDV/HDV cameras
Switch on the camera and set it to playback mode. Check the battery level and plug in
the camera's power as required. Now connect the camera with a FireWire cable to the
computer. Windows will normally detect the camera automatically. Then click
"Continue" in the dialog that appears.
Note: Not all computers feature a FireWire interface. in most cases, this may be
added without much trouble. In this case, talk to your computer specialist.
Note: You may also use a HDV camera in DV mode to, for example, transfer
recordings in the old DV format. We have noted problems with this mode in many
cameras, and therefore recommend that the Record mode of the camera is also
switched to DV, switching the camera off and then on again.
MiniDV/HDV cameras - transferring scenes
The camera can be conveniently controlled in
MAGIX Video easy 4 HD with the remote control.
Simply go to the position that you would like to
transfer to MAGIX Video easy 4 HD and click the
"Transfer video to computer" button.
Repeat the process until all of the desired scenes have been transferred.