3.0

Backup information
All available information about the selected backup is displayed here. This allows you to certify which
backup you are currently working with.
Target
All drives which are currently connected to the computer are displayed under "Destination", plus all
partitions that have been created on the hard drives. Drives are underlined, and the partitions associated
with them are inserted directly under them in the list. The name of the partition is displayed in brackets
(provided that a name has been assigned).
Note
: In case a sensible pre-selection can be made, a partition for restoring the backup will be suggested to
you for the selected backup. This will be displayed under "Destination" with a white background.

Confirm the pre-selection by pressing "Enter" on the keyboard (also possible via "S").

If you want to restore the backup on another hard drive or partition, then select this via the arrow
keys. Confirm with "Enter" or "S".
Restoring the backup will now be started and located in the destination after it is completed.
Note
: After the backup is finished, the medium with the backup file must be removed form the drive so that the
backup is not detected again when the computer is restarted!
Page 45