11.0

82 SAMPLITUDE QUICKSTART
Detailed information on the various punch functions can be found in the menu reference
under "Playback -> Recording mode / Punch In -> Punch Marker Mode (view page 640)".
Multi-track recording
To configure multiple tracks for multi-track recordings at once, the "Project tracks & Mixer
setup" dialog can be very helpful.
1. 1. Open the "Project tracks & Mixer setup" dialog by pressing "Ctrl + Shift + M". You
can also access it via "Options -> Project properties -> Mixer setup...".
2. Click on the "Routing" box and select the option "Route all tracks to existing stereo
devices" if you want to record in stereo. For mono recordings, select the option
"Route all tracks directly to exisiting mono devices".
3. In case the recording does not begin at the current track, enter the corresponding
track number in the "Start with track" field.
4. In the "Device setup (track in/output assignment, routing)" area, click the "I/O devices"
box and select "Record".
5. If you have four recording devices, enter "4" into the "Track number" field. The
devices will then be set up across the next four tracks.
6. Click on "OK".
Preparing to record
• For all tracks to which you wish to record, press the "R" button to activate the tracks, i.e.
make them ready for recording.
• Click on the button with the loudspeaker to activate monitoring.
• You can set the maximum gain of your signal from your recording sources. To monitor
the peak levels you can open the Peak meter in each track's context menu (Trackbox ->
"Track visualization").