Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude
71727374757677787980
Table Of Contents
SAMPLITUDE QUICKSTART 79
wish to record onto to "active". To do so, press the record button; it turns red, and the
input level of the sound source appears as a light blue bar in the peak meter.
If you can't to see the input level bar, check in the track editor (menu "Window -> Track
editor" if your sound device is connected to the same port listed under "In". If not, set the
track's input device to the port of the sound card input of the sound source by clicking
"Audio -> In".
If you can see the level as a bar, but are not able to hear anything yet, then make sure that
the output device of the track correlates to the output of your sound card.
If you have selected "Manual monitoring" as your monitoring mode ("Y -> Audio setup"),
please click the loudspeaker symbol next to the level display on the track to view and hear
the input signal.
Now click on the small square to the top right of the "Record" button in the transport
window.
This opens the recording options:
First select the format for the recording. There are detailed settings for the desired audio
format available to you under "Format options".
A recording mode set to 16-bit at a sample rate of 44.1 kHz corresponds with CD
quality. A bit resolution of 24-bit or even 32-bit (float) makes sure that hissing during