11.0

706 OPTIONS MENU
Record
This dialog enables the selection of various dialog configurations and cursor behavior when
recording.
Format: Choose from 16 bit, 24 bit or 32 bit (float).
Enter the Recording offset in samples to ensure consistent movement of your audio
recordings with regard to the existing audio material in the arrangement.
The following options are then available:
• Pre-activate all tracks for track punch recording
If this option is activated, all set record devices will open when the playlist is opened, so
that you can start a recording on all tracks using the track record button.
• Save each take in a new file
This option saves each take of a recording as a new file. Loop recordings, however, are
collected as a take and then saved into the same file.
• Read CD/DAT marker
DAT devices and several professional CD players output digital marker information via an
SPDIF output e.g. CD track markers or DAT markers). This recording option reads this
marker information from the SPDIF input of the sound card and applies it to the VIP,
provided that the selected audio device supports this.
Pre-recording (ASIO only): If recording is activated from the stop state or during
playback, this function inserts audio material that you have added at the beginning of the
recording to the beginning of the current recording. Prerecording lengths of 2, 5, 10, 30,
60, and 120 seconds may be set.
If a recorded object is dragged to the left, then the audio material recorded before actual
recording start is visible according to the set pre-recording time.