11.0

682 OPTIONS MENU
Track number (0 for all): Start with track 0 as active track: This option permits a change
to I/O routing for a certain number of tracks. If you set the track number to 4, starting at
track 8, the selected routing setup is applied to tracks 8-11.
Hint: To be able to switch these commands to active, you must first replace the "Do not
change the setup currently used in the project" option in the neighboring "Routing" field
with another option from the selection menu.
Routing
Keep current setup: No routing assignment takes place if a preset is loaded.
Assign all tracks to stereo master: All tracks (incl. AUX and submix busses) are routed to
the master. The panorama settings are alternatively set to left and right via L/R panning.
Use this if you are recording stereo sources as mono pairs.
Assign all tracks to different mono/stereo devices: All tracks are assigned to the
different output devices. In the System/Options Window (Shortcut: “Y”) you can define
which devices are available in Samplitude and which are not. When routing to mono
devices, the tracks are also placed right/left in panorama alternatively.
Initialize tracks on surround channels: THe corresponding tracks are created here after
you have selected the surround setup.
Use saved setup or preset: The settings saved in the preset are used.
Playback options
This item launches the Play Parameter dialog. Please refer to the Play/Rec menu section,
for further details.
Shortcut: P
Autosave
The Autosave dialog is available via the project options.
This dialog provides options for creating backups of projects. The button View backup
project opens the selected backup in the arranger.