Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude
661662663664665666667668669670
Table Of Contents
664 MIDI MENU
MIDI Options
Detailed information on this can be found in the chapter "System settings -> "MIDI options
(view page 32)".
MIDI Record Mode
The "MIDI record" modes define how the newly recorded MIDI data is inserted into the VIP
if there are already MIDI objects at the recording position.
Normal
The record mode corresponds with the audio recording, i.e. a new MIDI object is created
on top of the existing object at every recording. The old objects are retained. This way you
can record several takes of a passage and compare them afterwards.
Overdub
In this mode the new data of each new MIDI recording will be mixed with already existing
takes.
Replace
In this mode MIDI files of the existing object will be replaced with newly imported ones. If
you record over several objects, these are combined into a single new object.
MIDI Panic – All Notes off
This command sends a "Note off" command to all MIDI devices which are not deactivated
in the MIDI options for all 128 notes on all 16 channels. Furthermore, "Sustain" (controller
64) is switched off and the pitch wheel and modulation are set to 0. In addition, an "All
notes off" command is sent to all VSTi's used in the project.
If MIDI tracks or objects exist in the project, the same function is also accessible by clicking
the stop button in the transport console or toolbar when the project is in "STOP" state.