Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude
641642643644645646647648649650
Table Of Contents
644 PLAYBACK MENU
Template in instrument mode (mute): The accompaniments consist of multiple individual
instruments that can be muted using buttons 1-8 (or the corresponding number keys on
the keyboard).
Variations mode (solo): These accompaniments contain multiple variations of the same
instrument, between which you can switch back and forth during playback using buttons
1-8.
Reset: This function allows you to switch between various "Reset" functions. Your choices
are:
• Set the "Mute/Solo" buttons back to original state or
• Stop the last recorded loop at the play cursor position or
• Stop all imported loops at the play cursor position or
• Stop all loops at the play cursor position or
• Delete the entire project.
Handling
After start-up you'll see at first the simple view of the auto jam session. On the right-hand
side you'll find useful hints on how to use the feature.
Action: The most important handling element is displayed as an Action button (bottom
left), which can also be controlled using the space bar or via MIDI/joystick.
1st click: Playback begins. Nothing is recorded yet.
2nd click: The first recording starts. Record your first beat(s). As a sign that it's recording,
the action button turns red.
3rd click: The recording ends. The recorded section is then inserted into the arrangement
as a loop and begins playing repeatedly. This serves as a speed measurement for the next
loops.
4th click: In the next track, the recording starts. You'll begin hearing the previously
recorded loop. Now you can add an additional voice to it.
5th click: The recording ends, playback of the first and the newly recorded loop continues.
The next clicks start and end other recordings (Clicks 4 and 5 repeat). Every time the
recording is restarted, it's recorded in a new track. All loops recorded up until now are
played continuously.
Double-clicking on the action button stops the last loop recorded. Clicking three times
ends all running loops. You can use it to separate various song parts from one another.
By clicking on stop, the playback/recording is stopped immediately.
Loop effects
You can change your arrangement with these real-time effects. The loop effects influence
either every track or just the last track recorded (see below).