11.0

618 TOOLS MENU
free space in the "Unused" column. In the "Edit" column you'll find a checkbox for each file
which can be used to add the files to the process. Only those files that contain unused
sections of audio data are pre-selected. To keep these, remove the check.
Note: The list can also contain files not actually referenced by the VIP, but referenced by
the VIP's undo chain. These files are 100% unused samples and will be deleted completely
when checked.
If you have discarded, for example, an entire recording session, you can delete the unused
files as well. If, however, you had opened audio material from other sessions or your private
sample library and didn't use them any more after that, you should uncheck these files so
that they don't get deleted.
We recommend that before using the function you should delete the "Undo" chain and
close all unused wave projects.
Tip: If the relevant audio files are required later on for additional production work, the
following procedure is recommended for archiving the finished production.
Save your entire project in a new folder ("File menu -> Save complete VIP in..."). In the save
dialog, select the command "Copy only Samples used in VIP". Now only those audio files
/ samples that are actually required by your archiving project will be found in the few folder.
You can now save the content of this folder to a backup medium (for example, CD-ROM or
DVD).
Delete freeze data
Use this function to delete unused data that was created when freezing but is no longer
needed after "unfreezing".
Compile project data
This dialog displays all files located outside of your project folder. All files selected in the
"Edit" folder can be compiled in your project folder. You can either copy or move the files
displayed into the project folder. After processing, you should save your project.
Waveform Generator
This dialog contains a powerful generator with test tones.