Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude
591592593594595596597598599600
Table Of Contents
596 EFFECTS MENU
Overview of the details
When you open VariVerb for the first time after loading, the device will start in "Easy" mode.
The Display is the core of VariVerb as it visualizes the possible parameters, their current
values and a graphical visualization of the reverberated envelope.
The preset list is located above the device interface in the console where you will find the
typical settings for various general tasks in everyday studio work.
For general AUX routings there is
a separate category where all
models are available in a
"Default" setting. This section
can be used to design reverb if
you want to start from scratch.
The mixing ratio is preset to
100%.
The controller for the mix ratio can be found to the right of
the main interface (direct signal and reverb portion).
To the left, the "Test" section and a "Mute" button can be found.
You can use these for temporarily switching off the input
signal during longer reverb decay periods, i.e. if you want
to judge the resonating reverb precisely.
On the other hand, a muted input can be useful for more
complex room design using the help of the test sample:
These allow for acoustic appraisal and fine-tuning of the
reverb effect using three samples: stick (sidestick), snap
(finger snap) and vocal (short vocal sample).