11.0

EFFECTS MENU 581
am-munition Configuration
By clicking on the "Config" button you can access additional am-munition parameters.
Here the regular compressor display will be hidden and a separate display window will be
activated. This alternative view shows a series of settings to the right which have a global
effect on the plug-in (independent of the selected preset):
Peak-hold time: The displays for output/gain reduction, clipping as well as extreme
sidechain levels possess a save point for top values to display maximum values. You can
determine the holding period of the top value with this controller. After this time the peak
hold display will fall, as long as no higher value exists.
Mouse mode: Normally, am-munition aligns itself with the host's settings for how the
mouse pointer moves and with regard to how controls are executed.
Mouse wheel inc/dec: You can use the scroll wheel of the mouse to affect direct changes
to wheels and sliders. Parameters allows the intensity of the value change to be
determined by playing with the wheel.
Peak/limit meter range: This setting determines the display range of the output peak
meter, or the level reduction of the limiter (depending on the position of the 'GR/Output"
circuit).
The remaining area of the configuration page is reserved for preset-based options.
High-pass filter @ input: At the plug-in's input there is a high-pass filter with variable cut-
off frequency and edge steepness. Especially in the case of mastering applications, it can
take over the tasks of "cleaning up" the signal before additional processing and filtering out
low-frequency sections which aren't required or could possibly lead to overmodulation /
reduction of the signal's maximum achievable loudness .
The filter applied has Butterworth characteristics (q=0.707) and can be switched from 2nd
order to 4th, 6th, or 8th order.
For exact setting of the filter, we recommend working with subwoofers in good spatial-
acoustic conditions.