11.0

528 EFFECTS MENU
DeNoiser - Noise print assistant
The noise print assistant wizard offers (in addition to the "Get noise sample" menu) two
options to create a noise sample, whereby the "pick" method of the "Get noise sample"
function may be the better approach.
Proceed the following way to create a noise sample using the noise print assistant:
1. Determine noise print length
Range length or internal standard value: If you have stretched a range, a range length will
be used. You should make sure that the range is not longer than is necessary, because
every created noise sample instance in real time will be added to the project. If, conversely,
no range is selected, an internal length is used, which should normally deliver a usable
result.
Target length: Set an explicit length.
2. Extract noise print from the audio material
Extraction at beginning of range or play cursor: The noise sample will be extracted
from the range available, or otherwise the start position will be determined by the play
cursor.
Extraction at the position of the lowest level: This search function analyzes the audio
object for soft areas. Set the search area above the search options and click the "Start
search" button. You can cancel the search by pressing "Esc".
After at least one quiet range has been found, you can select it using << and >> and listen
to it using "Play...".
3. Exit the assistant with "OK"
De-noiser – Remove unwanted noise
(Samplitude Pro - without Cleaning and Restoration Suite)