11.0

518 EFFECTS MENU
The Declicker is on the left side of the dialog, and the Decrackler to the right.
Declicker/Decrackler – presets
Load, save, delete presets: Here you can save, load or delete settings. The default file
extension is *.DCK.
Declicker/Decrackler – signal display
The signal display shows you the edited material as a continuous waveform or a
spectrogram. In the displays you can see at which position the declicker (red) or the
decrackler (blue) have engaged.
On the left border of the graphic display is the reduction display of the declicker. It shows
by how many decibel the detected click has been dampened. On the right border the
reduction display of the decrackler is found.
Display options: this button opens a settings dialog where you can configure the signal
display. Select the right and left channel or the middle from both left and right (L+R). You
can additionally set the channel that should be visualized by both reduction displays. The
settings are applied by closing the dialog.
Declicker/Decrackler – parameters and control elements
Declicker sensitivity: Using this parameter you can determine the declicker's sensitivity to
noise.
Declicker dampening: Using this parameter you can influence the intensity with which the
declicker engages with the detected areas of the audio material.
Decrackler sensitivity: Using this parameter you can determine the decrackler's sensitivity
to noise.
Decrackler dampening: Using this parameter you can influence the intensity with which
the decrackler engages with the detected areas of the audio material.
Inverse: If this switch is activated, you will hear only the part of the signal that is removed
by the algorithm. When the parameters are set optimally you will hear the complete