Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude
471472473474475476477478479480
Table Of Contents
476 EFFECTS MENU
Play/Stop: This button starts/stops the real-time preview function. Use it to check the
corresponding filter setting.
Latency display: This value provides information about current distortion of the effect in
samples that should be considered for latency compensation. The latency of this effect is
influenced by the set effects mode (among other things).
OK: Accepts the parameters
Cancel: Rejects the parameters
Help: Opens the "Help" file for this effects dialog
EQ116 - Graphical display
Filter graphic: This graphic provides a view of a number frequency-related details:
• Amplitude response: The resulting amplitude envelope from the individual band
settings
• Group runtime / phase response: One of these envelopes may be shown optionally.
Switch between them in the scale options dialog. Group runtime describes the
frequency-dependent time delay for the signal, the while phase response indicates the
dependency of the phase on the frequency
• Original: This curve displays the original frequency response
• Edited: This curve shows the frequency response after processing by the effect
The display of the filter graphic may be adjusted by accessing the "Scale options" and by
using the vertical and horizontal faders.
In/Out displays: These meters show the input and output displays in dB.
Reset (meter): Reset the reduction, in and out displays.