Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude
451452453454455456457458459460
Table Of Contents
458 EFFECTS MENU
Dynamics - Parameter
Ratio: With this parameter you can control the compression ratio. A value of 5.0, for
example, corresponds to a volume reduction that's five times the threshold, while a value
of 1.0 means that compression does not take place.
Threshold: Here you can set the threshold, above and below which the corresponding
effect should work.
Attack: Here you can set the time frame between the crossing of the threshold and the
maximum extent of the effect.
Release: Here you can set the time frame between the falling off of the threshold and the
complete dissipation of the effect.
Gate Level: This parameter specifies which levels should be set to 0.
Advanced Dynamics
Advanced dynamics – General controls and presets
Load, save, delete presets: Here you can save, load or delete settings. The default file
ends with *.DY2. In addition, all dynamics presets (*.DYN) can be loaded. The parameters
are converted to those available in the advanced dynamics module. If saved from within the
Advanced Dynamics processor, the preset will be saved with the *.DY2 extension.
Dynamic scope: When you play the selected object/sample, you'll see the in and out level
of the signal as a white, scattered line.
Reduction display: To the right of the graphic display you'll see the level reduction of the
played audio material.
In/Out displays: These meters show the input and output displays in dB.