Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude
451452453454455456457458459460
Table Of Contents
EFFECTS MENU 455
Loudness adaption
This command executes an automatic RMS normalization. The loudness of each individual
title is analyzed and the level of the titles is adapted to create uniform volume sensitivity.
The preset target value is -15 dBfs. The target value may also be adjusted individually. The
closer the value is to 0 dBfs, the louder the signal will be.
Volume adjustment provides exact control over the level of volume balancing between the
titles and the target volume value.
Show/Hide
Use this function to show or hide selected ranges of samples in a wave project. The
amplitude will be changed according to the progression from the start value at the
beginning of the range to the end value and the end of the range.
You can activate a simple fade-in process in the dialog with the "Fade start in % = 0",
"Fade end in % = 100". A simple fade-out can be executed by setting "Fade start in % =
100", "Fade end in % = 0".
You can have the transition display in three different curve envelopes; exponential, linear or
logarithmic.
Please note that in virtual projects, powerful real-time fade and crossfade options are
available, which usually make the use of destructive fade routines unnecessary.
Set to zero
The level in the selected range is set to zero. This way, unwanted parts within a sample can
be removed.
Dynamics (Overview)
What compressors are available in Samplitude?
There are four different modules for dynamic editing available in Samplitude:
1. A quick and easy-to-use dynamics module. Its main functions (setup) can be set in the
compressor, expander, gate, and limiter. After this, function-specific parameters may also
be changed. "Dynamics" always uses an efficient algorithm to spare CPU resources