11.0

TRACK MENU 419
Reset: Returns all settings to the Samplitude basic settings.
Copy/Paste: These buttons let you quickly apply the settings to different tracks/objects.
Edit: Opens the dialog of the active effect. This can also be achieved by right clicking the
desired list entry.
On/Off: Switches the respective activated effect "on" or "off". You can achieve the same
result by activating or deactivating the check box preceding the corresponding effect.
Remove: You can also remove internal Samplitude effects (FX inserts) instead of just
deactivating them if you want to save resources. "Unloaded" effects are displayed with a
minus sign in the box on the left side.
Play/Stop: Plays and stops playback at the current cursor position.
Copy track effect settings
This command allows you to copy the complete effects settings of the active track into the
clipboard (in order to paste them to another track). This includes the order and parameter
adjustments of all internal effects including those of DirectX and VST plug-ins.
Reset track effect settings
This command resets all track effects settings to default values – i.e. no effects are applied.
Save track effect settings... / Load track effects settings...
Here you can save custom track effect setting in the new .TRK files or load previously
saved or preset track effect settings.
AUX sends
In this dialog you can create new AUX sends or determine the panorama out of existing
AUX busses. You can also switch the AUX track to pre-fader or post-fader or deactivate it.
Dialog description
You can enter the send level of each AUX bus numerically or pull the orange bar in the grey
field from left to right.
By default, all AUX busses are routed "post" in Samplitude. To switch them to "pre",
activate the corresponding box.
New AUX bus: Clicking on this button creates a new AUX bus.
Reset AUX sends: Resets all AUXes.