Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude
411412413414415416417418419420
Table Of Contents
TRACK MENU 417
Stereo in: Switches recording type to stereo.
Mono In: Switches recording type to mono.
Mono mix: Switches recording type to monomix. When in stereo mode the mono signal
will be tapped on two channels and mixed together.
Mono effect calculation: Effects for this track will be calculated in mono.
Audio: Switches the track to an audio track.
MIDI: Switched the track to a MIDI track.
VST MIDI out - recording: By activating the option "VST MIDI Out recording" on a track
you can record all received VSTi MIDI Out data in the corresponding track.
Submix/AUX Bus: If the active track is a bus, it can be defined as a submix and/or AUX
bus.
Mute Bus Inputs: Sets the input of the selected Submix Bus or AUX bus to inactive, i. e.
the signals routed to the bus are not routed through to the signal path of the bus.
Group track controls: With this function you can group control functions like faders,
record or mute buttons from different tracks. If you want to group track controls, select the
desired elements while holding down the Ctrl key and then activate "Group track controls".
Control groups will be automatically called up when one of the elements of this group is
activated.
Example: When muting a submix bus, no AUX channels from the original tracks should be
fed. This is achieved by grouping the track mute buttons with those of the bus. An
additional control group can be created in order to simultaneously control the faders of
several tracks. By clicking and simultaneously using the Shift + Ctrl keyboard shortcut
individual faders can be moved in the opposite direction.
Note: Please note that a control element can exist in only one control group. Overlapping
control groups can't exist.
Ungroup track control: You can use this function to ungroup. To do so, click on an
element in the control element and select "Ungroup track control."
Global Mute: Enable/Disable all mute states of the tracks
Global solo: Enable/Disable all solo states of the tracks
Global: Solo-safe: All tracks will be switched into solo-safe mode. In this mode the
corresponding track, if switched to solo, will be monitored together with its AUX returns.
Global: Solo-PFL: All tracks will be switched into solo-PFL mode. In this mode the
corresponding track, if switched to solo, will be tapped at a position before the fader and
heard as a pre-fader signal.