11.0

EDIT MENU 395
Strip silence
This command cuts the objects apart at the position of the silence. Before applying the
command, you can add a threshold value in the dialog for the silence and used signal. The
cut objects will be marked, making it easy to delete them using the "Del" button.
Threshold for silence detection (dB): If the signal falls below this value, the object will
also be cut at the corresponding position.
Threshold for signal detection (dB): If the signal rises above this value, the object will be
cut at the corresponding position.
The "Minimum length of silence" parameter sets the length which silent passages should
be applied so that they can be selected and deleted. This way, you can remove very short
passages of silences from the cut.
With the "Crossfades" option, you can create automatic crossfades between at the cut
positions of the objects.
Append project
With this function, a project can be appended to another one. The objects or wave files of
a selected project will be immediately copied to the end of an existing object.
To execute this command, first click on the project to which you would like to attach. Next,
select the "Add project" command, followed by a mouse click on the project which is to be
added. Finally, confirm via the appearing dialog by clicking on the "Add" button.
Add a VIP to a VIP
Virtual projects can be inserted into other virtual projects and added to the end of already
existing virtual projects.
All objects of the appended VIP remain separated and are inserted at the end of the
existing project from the first track downwards.
Note: The mixer settings for the inserted project will not be applied with this command.
Add wave project to a wave project.
"Attach project" allows you to copy a wave project to the end of an already existing wave
project.