Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude
271272273274275276277278279280
Table Of Contents
278 SOFTWARE-INSTRUMENTE/VST-PLUG-INS/REWIRE
fitting for Delay Plug-ins in Economy Tracks or for bouncing of Economy Tracks. This
option is also recommended for all plug-ins that produce audio independently of their input.
Note: A continuous calculation, even of empty or still tracks, takes place in the Hybrid
Engine. This function can be deselected in the global performance options by checking of
the option "Deactivation of empty or still tracks under ASIO - ASIO Silence Economy".
No automatic copying: This option prevents automatic copying of plug-ins when you split
or copy objects.
Load/Save patches/banks: You can save an instrument's settings and sounds. The
standard formats for this are: *.fxp for patches or *.fxb for whole banks. Several
instruments possess their own patch/bank format. Some instruments have their own
patch/bank format; settings are then loaded and saved directly via the instrument's
interface.
Set parameters randomly: Use this function to set all parameters of an instrument to a
random value. For synthesizers, this option can lead to surprising results and provides
interesting results for sound design thanks to random generation of new sounds. You
should note, however, that parameters can only be set when they are accessible via the
interface. With some very complex virtual synthesizers, like, for example, modular systems,
some parameters may not be modifiable using this option. Please note that due to the
random placement of various parameters, very extreme sounds can be generated. This
may lead to no sound being produced at all or extremely loud volumes and frequency
ranges being reached. For this reason you should keep an eye on the preview volume while
experimenting with this function.
Automate next parameter: The next parameter which you change during playback will be
recorded as automation. You can also do this by holding "Ctrl + Alt" while you click and
change the parameters with the mouse.
Learn hardware controller: Activate this function to learn your hardware controller.
1. Grab and move the plug-in element that you want to learn
2. Move the element on the hardware controller you selected
Pay attention to the following:
• The hardware controller element must have been learned in the hardware controller
setup beforehand and may not be empty.
• Learned elements permanently modify the internal mode. Assignment is also available
later for other projects.
• Assignment can be lifted again via the "Restore modes" button beside the internal mode.
Play and monitor instruments live
Monitoring
Apply the following settings for live monitoring: