11.0

MIDI EDITORS 235
Q start - Start quantization
Q Start + length - Start and length quantization
Q only length - length quantization
Soft Q start - start quantization approximation
The "Apply standard Q" applies quantization according to the selection.
Note: If you give the "Soft Q" parameter a value other than 100, please take care that you
also change the setting to the soft quantization mode. If the corresponding settings for
quantization are to be considered, then the command "Soft Q start" must be set as the
standard quantization. In contrast, quantization commands "Q start" and "Q start + length"
always proceed with 100% strength (Soft Q).
Undo quantization/reset
With the help of the round arrow buttons, you can undo/redo the last quantization made.
In this case, the counter-clockwise round arrow serves as the "Undo quantization" function,
while the clockwise arrow serves as the "Redo quantization" function.
Reset MIDI quantization: This function resets all quantization processes.
The "Standard settings" button provides the option of resetting the preset values:
Q threshold: 0
Q window: 100
Swing: 50
Offset: 0
Humanize: 10
Soft Q: 25
Step recording via keyboard or controller keyboard
In the MIDI editor, you can also carry out so-called "Step recording" using the computer
keyboard or MIDI fingerboard. First, activate the respective button.
The play cursor shows the scope of the current octave in which the following entries take
place. Now you can enter MIDI notes step by step via your keyboard. Note length and step
length can be specified using the length quantization value. The most important keyboard
shortcut for entering MIDI notes using step recording: