11.0

SURROUND SOUND 205
Presets
Surround formats that have already been created can be recalled, and newly created
formats can be saved here. The number of surround busses, description, order and
position coordinates of the loudspeakers are saved in a preset. When loading a preset the
corresponding default settings are loaded which correspond to the playback device
settings. When loading a preset, the default values belonging to the preset are applied to
the playback device settings.
Get default
Pressing the button loads the default configuration of the playback devices belonging to
the currently active preset.
Set Default
The current assignment of the surround busses to the playback devices is saved as a
configuration of the currently active preset by pressing this button. This configuration is
then always loaded when the preset is opened.
Audio device settings: Save/load in preset
If this option is activated, the current playback device configuration is saved during
playback independent of the default configuration in the setup.
Channel configuration
Name
Determines the name of the individual surround busses. The abbreviation used in the
following “Abbreviation” column is then generated from this description. The first letters or
subsequent upper case letters of the words are used for the abbreviation.
Left = L
Left surround = Ls
LFE = LFE
This abbreviation is used in the surround panorama module and for labeling the
corresponding mixer channels. During surround trackbounce the abbreviation is
automatically added to file name of the .WAV files that is to be created.
Median / Frontal
These columns describe the position of the respective loudspeaker in relation to the
median and frontal levels.
Position x / Position y
This describes the precise position of the loudspeaker in a system of coordinates. This can
be edited by entering the value manually. The settings refer exclusively to the loudspeaker
positioning in “Sound field" mode.