Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude
201202203204205206207208209210
Table Of Contents
204 SURROUND SOUND
Besides the channels of the audio track, the mixer of the new VIP now also contains the
surround master in the newly selected surround format (e.g. 5.1 ITU L, R, C, LFE, Ls, Rs).
All mixer channels of the corresponding VIP tracks are automatically routed to the surround
master. The stereo master of the mixer is first hidden; however, you can reveal it again by
clicking the "Master" button in the mixer. You can either route the individual mixer channels
to the surround master or the stereo master.
Converting an existing stereo VIP into a VIP with mixer in
surround format
In the mixer of an existing VIP click on the mixer "Preset" selection button at the bottom
right corner under the "Setup" and select "Surround". The "Project surround setup" opens,
where you can select your preferred surround format (for example 5.1 ITU).
Project Surround Setup
Setting the physical output of the surround busses
The “Project surround setup” window opens with a mouse click on the audio device button
in the surround master on the mixer or on the “Setup…” button in the “Surround panorama
module” or by selecting the "Setup" button in the master section of the "Project mixer
setup" dialog.
The surround format for the mix is set in the “Project surround setup” window. You can
access various presets (for example 5.1, ITU, DD, DTC...), or edit and save your own
formats. The filter settings for the LFE channel are also set here.