11.0

200 STEREO EDITOR
Stereo Editor
Right-clicking in the panorama controller in the arranger, mixer and track editor allows you
to change panning from the left to right channels for every track in the stereo editor as well
as further settings related to the phase of the track.
Hint: The settings made here are not effective if the track is routed to a surround bus or
surround master or if the option "2-channel surround mode" is activated. In both cases the
surround editor is used for panning.
With mono tracks, the signal is converted from mono to stereo at the position of the
panorama controller, i.e. effects or plug-ins can still be added in stereo. In accordance with
the Samplitude V9 default settings the panorama controller is only followed by post plug-
ins and post AUX sends, i.e. all other effects are processed in mono. The routing positions,
however, can be changed in the FX routing dialog.
Stereo dialog options
Panorama: Here you can set level distribution between left and right.
Stereo width: Adjusts the stereo bandwidth for each track.
If set to the center, no changes occur. If you move the controller to the right, you will only
hear the mono part
By right-clicking, you can set the enhancer function for the corresponding track. The
middle and side signals will be separated and their volumes edited separately.
Warning: Because mono signals have no side signals, you will change only the middle
signal withe the stereo width control. If set fully to the right, the mono source material will
no longer be heard.
Detailed information is provided in "Effects -> Stereo/Phase -> Multiband stereo enhancer
(view page 467)"
Copy L-R