11.0

190 EFFECTS AND PLUG-INS IN AN OVERVIEW
Robota - Config view
Use the “Spanner” symbol at the top right of Robota to access the “bottom side”.
You can change the following settings here:
• “MIDI play” section:
• Set the MIDI Receive Channel to trigger the 8 voices externally.
• Determine the “trigger keys” for the individual instruments.
• MIDI controller matrix: A selection of MIDI Control Change numbers is located on the
right and can be used to control the sliders of the currently selected instrument
externally. As factory settings this list contains the default CC numbers of the M-Audio
Oxygen 8 keyboard. The right list displays the available parameters of the engine for
every source. You can customize the controller matrix and even route one source to
several targets.
Robota - PATTERN/DRUM KIT PLAY section
• Select the "Play" channel. This does not necessarily have to correspond to the "MIDI
play" channel. depending on how you have designed your MIDI working environment.
• Select the “trigger key” and the corresponding pattern or drum kit. This lets you “play”
patterns or kits on the keyboard.
• “Change“: Select the time when the change is to take place (immediately, with the next
beat, or always on bar 1).
Robota - GROOVE PRESET section
• “Swing”: If necessary, choose a swing preset from the list. The power of the presets can
be adjusted in the sequencer section by using the % controller.
• “Velocity”: Select a preset to modulate the volume of your pattern.