Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude
151152153154155156157158159160
Table Of Contents
MIXER 151
Hint: When the settings for the master playback device are changed, all tracks routed to
the master will also automatically change settings. If you don't want this to happen, select
"Master inactive" before setting up a new device.
Global buttons
Some additional buttons for adjusting the global settings of the mixer window and mixer
handling can be found to the right side of the mixer window.
This includes (anti-clockwise from bottom left):
Start track: If the arrangement has many tracks, only a section of the corresponding mixer
channels are generally displayed in the mixer window. The visible section can be moved
using the scroll bar at the bottom of the mixer.
Hold the “Shift” key down and click on one of the “Start track” buttons to save the current
view (a left click is sufficient the first time).
You can recall the previously saved section by clicking again on the “Start track” button.
Right click on the "Start track" button to open a context menu which gives you the choice
between "Load snapshot", "Save snapshot", and "Delete snapshot".
Solo/Monitor/PFL/AFL/Solo in place: (see below)
Play/Stop: Playback of the VIP can be started and stopped using these buttons. A right
click opens the transport controller.
Show functions: To the right of the master volume fader, individual sections of the mixer
window can be switched on and off.
Group selected controls: These two buttons are used to group and ungroup elements of
the mixer. If you want to group track controls, select the desired elements while holding
down "Ctrl" and then activate "Group track controls". To ungroup, choose one of the
elements in the group and then press "Ungroup controls".
AutoRec: This display indicates recording of automation data such as volume and
panorama on at least one track.
Bypass: This button switches off all mixer effects for comparing the settings.
Solo/Mute: All solo/mute functions can be globally activated and deactivated using these
buttons.
Preset: By clicking on the preset menu, you can select various mixer setups.
Setup: The mixer setup dialog can be opened by clicking the "Mixer setup (view page
681)" button.