11.0

146 MIXER
In: Determines the audio/MIDI input for recording.
Gain: Controls the mixer input amplification for each channel.
Aux sends: Use this button to set the AUX send level of different
AUX buses. Open the menu by right clicking for advanced
settings like "Pre-fader send", "Sidechain send", or "AUX pan
editor".
Inserts: Here you can add effects to the channel strip. Clicking
on the arrow right of the relevant insert slot opens the selection
menu.
Equalizer: This section lets you change the sound of the track
signal by means of a 4-band parametric equalizer. The knobs
change the volume of the filter band.
You can numerically edit the gain and frequency width of each
filter in the number fields.
Right click on one of the dials for fine tuning. Samplitude displays
an EQ dialog for you to specify exact settings.
Panorama: This adjusts the signal alignment in the stereo
panorama. The settings on the knob have a different effect on
mono and stereo tracks. When set to the center position, the
track signal is held in the center of the panorama irrespective of
the whether the track is mono or stereo. If the knob is moved
away from the center position, the mono signal is moved to the
left or right within the stereo field. For a stereo track, the
alignment between the left and right channels changes within the
track signal.
Beside the panorama dial, you'll also find a switch to reverse the
phase.
Right click on one of these two control elements and the stereo
editor (view page 200) will open for you to adjust additional
settings like panning laws or the stereo width.