11.0

140 MANAGERS
In "Universal" or "Range" mode, drag out a section in a take composer track. Use the
keyboard shortcut "Shift + C" to transfer the selected object's section to the first track.
"Auto crossfade (view page 400)" mode is also activated as a default during this process.
In this way, the best parts of the available takes can be selected and added to the top
track in the take composer. These parts can be combined to create the perfect take.
When the take composer project is closed, you can select if the changes should be
applied, thereby transferring the take manager's "master" track into the original project.
VSTi manager
The VSTi manager facilitates easy display, insertion, and deletion of MAGIX, VST, and
ReWire instruments in the current project. Right clicking on the selected instrument opens
the plug-in dialog of the selected VSTi. If you click on the plus sign beside the instruments
display, the outputs to the assigned tracks will be shown. By right clicking on "Output to
track", you can select a track which should only be fed the individual output of each. The
assigned output then appears in the target track's plug-in slot.
The general instrument outputs are routed in the VSTi manager via "Routing setup". In the
dialog taht appears, you can specify how many outputs you want to route. You can either
route all outputs to the current track or, if you like, create new mono or stereo tracks.
Pressing "Del" removes a selected instrument completely from the project. If only individual
output signals were selected, routing to a track is canceled by pressing the "Del" key.