11.5

502 Project settings
www.magix.com
corresponds to a mono signal, and a horizontal line corresponds to a 180°
phase-inverted signal which usually indicates an incorrect cable connection.
Reset peak meter: Here you can reset the LED peak meters (Peak Hold
Display).
Tuner: Tune guitars and other strings with this option. The visualization
displays a calibration line at note A0. If divergent tones are played, the
deviation can be read off the calibration line, and the numerically displayed
tone pitch directly and can be corrected accordingly.
Set Marker 1: While recording you have the option of selecting a marker at the
current position of the playback marker (position line), in order to, for example,
mark an incorrect passage for correction later.
Recording: Click this button to start the actual recording process. Please note
that with active external synchronization as a Slave, the recording does not
start immediately, but rather at the start of each master.
Stop: Ends a running recording process. Should the computer be overloaded,
for example, as a result of swapping or disk access, the recording can be
canceled by pressing the right mouse button.
OK: Closes the recording window.
Varipitch/practice mode
Samplitude 11.5 Producer supports any tempo changes during playback -
even in virtual multi-track projects. Right-click on the scrub control of the
transport control.
Active: Activates the Varispeed mode.
Note: Once the Varispeed mode has been activated, you can close the dialog,
control occurs via the scrub control of the transport control.
Practice mode: If the practice mode is activated the pitch remains
independent of the playback speed. It is especially useful for pieces used for
practice (e.g. an accompaniment with guitar) that must be played slower
because the player might otherwise feel overstrained.