11.5

General settings 479
www.magix.com
 Each activated mixer element (recognizable by the red marking) is controlled
by the first fader
AUX
Controls all AUX sends in the selected channel.
EQ
Controls the EQ of the selected track via the knobs.
Output
Deactivate: If your PC does not have a motor fader, you can use this option to
deactivate the transmission of controller data.
Normal send: The MIDI controller data is received and processed. Program
data (e.g. fade changes in the mixer) are sent to the controller.
Send echo: The MIDI controller data is received and processed and forwarded
straight back to the controller. Controllers need this for their displays (lamps,
LEDs). Program data (e.g. fade changes in the mixer) are sent to the controller.
If your controller has difficulties with this (e.g. .Logic Control), activate "Normal
send".
Send echo (without fader touch): The MIDI controller data is received,
processed and returned to the controller. However, the fader values are not
sent back while it is moved (activated fader touch). Only the last value is
released to prevent increased data volumes. Program data (e.g. fade changes
in the mixer) are sent to the controller. If your controller has difficulties with this
(e.g. Logic Control), activate "Normal send".
Customizing controllers
Most devices available on the market understand protocols such as Mackie
Control or HUI. If your device is not included in the list, simply select the
nearest compatible device.
If you can't find your device in the list or want to change the default settings,
you should proceed as follows:
Before adapting an existing template to your controller, you should save it
under a new name using the "Save as..." option.