11.5

452 View Menu
www.magix.com
Rebuild graphic data
Display inaccuracies after complicated sample processing can be fixed by
using this menu option. The screen (window) will be cleared and redrawn to
display the project properly.
Sections
Samplitude 11.5 Producer allows the optional display of one, two, or three
sections of the samples belonging to one wave project or the VIP itself. Other
audio editing applications usually show only one window of a sample.
If you select “2”, Samplitude 11.5 Producer will display the same sample in two
window sections. Each section can be handled separately, and it is possible to
represent the complete sample in one section and a zoomed-in version of a
certain range in the other.
“3 sections” mode is especially useful for searching for loop points in wave
projects.
The whole sample can be shown in the upper section, while the section on the
lower left displays the beginning of the loop range and the section on the lower
right the end of the range. Use the split range function for this purpose ("B").
Return to "1 view" (Shift + B")
This is only an example of the “3 view" mode. All sections can be handled
independently.
You can also drag ranges over the section borders. Establish the starting point
of a range by holding the mouse button pressed and changing over to another
section. Samplitude 11.5 Producer will show you the size of the range; release
the left mouse button at the desired location to determine the end of the range.
Hide submix / AUX buses
This function lets you hide or minimize the tracks of the mixer buses. Please
read the corresponding notes in the mixer chapter.