11.5

Effects menu 437
www.magix.com
 Tempo sync: If this button is active, the plug-in is directed at the
host/sequencer tempo. In this mode, changes are made to the delay period
via the L/R delay using the musical snap grid (e.g. 1/4 note).
 Damping: This specifies the cut-off frequency at which the highs are
dampened during the delay. This useful for making the delays reverberate
more naturally or for creating special effects (reggae/dub-style effects).
 Feedback: This parameter regulates the internal amplitude of the delayed
signal that is fed back to the input. In "Digital" mode, this process is
completely transparent; in "Analog", on the other hand, higher values, a very
loud input signal, or the sum of these will make the use of dynamics
compression audible. In both modes, the nullification of the feedback
parameter is in the center of the fader. To the right, the plug-in works in "Dual
delay" mode (both sides work independently), and to the left, "Ping pong"
mode will be activated (the delayed signal alternates between the left and right
sides).
 Mix: Regulates the mix ratio of the original signal and the delayed portion.
Chorus/Flanger
This plug-in offers a simple way to make signals sound more interesting,
"spacier", thicker, etc. by modulating or delaying the pitch. The classical
domain of application is for guitars, Hammond organs, electric pianos, or
synths.
Chorus and flanger are two closely related effects, which is why we have
included them in a single plug-in. They normally differentiate in terms of delay
time, type of modulation, and degree of internal feedback.
Chorus flanger parameters
 Mode:
- Mono chorus: In this mode, the signal is fed through a delay unit and the
pitch is modulated. Original and delay copy are mixed into a monophonic
output signal.