11.5

Effects menu 431
www.magix.com
Material containing all frequencies in equal amounts are particularly suitable,
such as strings, orchestra chords, broad synthesizer pads, hissing, or wind
noise.
Filter
Dynam: Influences the dynamics of the modulator signal to reduce the
modulation depth of the vocoder.
This prevents two often undesired side effects of modulation. On the one hand,
the volume change of the modulator signal is added to the output signal in a
slightly more moderate form which may improve the power of the vocoder
voice. On the other, the low-level share of the modulator signal is ignored in
order to prevent modulation of the carrier by breathing or noise.
Smooth: Affects the speed at which the vocoder adjusts to the modulator
spectrum. The greater the value, the "lazier" the vocoder follows the modulator
and the "smoother" the sound changes in the carrier sound.
Filter graphic
Any frequency characteristic can be drawn in to optimize the results of the
vocoder. For example, simple disturbing bass frequencies can be eliminated as
the curve is corrected downwards to the left. Similarly, weak highs can be
strengthened as the curve is raised to the right.
Mixer
In the mixer you can also mix parts of the carrier and modulator signal to the
vocoder output signal ("Out").
If the output signal of a track is used as a carrier in the vocoder, this track will
be muted first, and then you can make it audible again in the vocoder mixer.
Presets
You can select predefined vocoder settings in the"Preset" list window. The
presets all contain vocoder settings, except the selected carrier signal. "Reset"
restores the vocoder default settings.
efx_ChorusFlanger
This opens the Chorus/Flanger effect in the essential FX.
efx_Phaser
Opens the Phaser in the essential FX.