11.5

394 Playback / Record menu
www.magix.com
in this mode, a range has to be selected which defines the beginning and end
of the recording. The "Set punch-in marker" and "Set punch-out marker"
functions are used to tell Samplitude 11.5 Producer where to punch in and
where to punch out. Next, set the play cursor to an appropriate position prior
to the punch-in point and start playback/recording with the "Punch record"
button in the "Punch" toolbar.
Important: When working with the punch in/out functionality, make sure that
"Auto crossfade" mode is activated by clicking on the corresponding button in
the toolbar. The auto crossfade will create smooth transitions between the
takes. This helps to prevent little pops and clicks!
There is also a way to perform looped punch-in recording. Simply select a
range over the desired punch region. The range is played back until you stop
the playback with the space bar. Each time the program loops through the
range, new takes are recorded at the punch markers. To find the best take
after the recording is completed, use the take manager!
Record options
This menu option opens the "Record" window. All necessary settings for
recording can be entered here. If you don’t need to open the dialog again once
it is set, just start recording using the record button on the transport control, or
by clicking the toolbar icon
Record mode: Select between stereo and mono and if you want to record the
audio into a RAM wave project or to the hard disk as an HD wave project.