11.5

File menu 329
www.magix.com
Note: The list can also contain files not actually referenced by the VIP, but
referenced by the VIP's undo chain. These files are 100% unused samples and
will be deleted completely when checked.
If you have discarded, for example, an entire recording session, you can delete
the unused files as well. If, however, you had opened audio material from other
sessions or your private sample library and didn't use them any more after
that, you should uncheck these files so that they don't get deleted.
We recommend that before using the function you should delete the "Undo"
chain and close all unused wave projects.
Tip: If the relevant audio files are required later on for additional production
work, the following procedure is recommended for archiving the finished
production:
Save your entire project in a new folder ("File menu -> Save complete VIP
in..."). In the save dialog, select the command "Copy only Samples used in
VIP". Now only those audio files / samples that are actually required by your
archiving project will be found in the few folder. You can now save the content
of this folder to a backup medium (for example, CD-ROM or DVD).
Delete freeze data
Use this function to delete unused data that was created when freezing but is
no longer needed after "unfreezing".
Close project
Closes the arrangement.
Project properties
Mixer setup
Here you can open the mixer setup (view page 499) dialog. Use this to set the
number of
tracks, AUX buses and submix buses as well as the routing presets
for the most frequent use cases.